Fast Worldwide Shipping

Accessories

Our hydrophones are used by professionals with the highest-quality recording, PA and measurement equipment available. If you have questions about compatibility with your equipment, please contact us.

As a convenience to all of our tourism professionals and recreational users, we attempt to offer select accessories that offer exceptional value and are proven to work well with our hydrophones.

$45.00
Battery-powered Bluetooth transmitter for headphones or portable speakers. Connect the 3.5mm TRS to the output of an audio interface, recorder, or...
+ −

$24.99
Connect a hydrophone with a 3.5mm output directly to your phone, tablet, or computer for real-time listening or recording. Great for general-purpose...
+ −

$349.99
Studio Quality Sound, Anywhere You Go The H5studio was made for seamless and professional production. Creators can record flawless...

$6.00
NEUTRIK NBNC75BTU11 75 Ohm Rear Twist BNC Connector for Belden 1694A. This product is offered for custom terminations onto CA-53 hydrophone cable. Special...
+ −

$4.00
Coaxial Cable (Sold by the Meter) #22AWG, coaxial cable with >95% coverage braided shield. All tinned copper conductors. Highly cut and...
+ −

$99.00
Use with 1" microphone calibrators to test hydrophone sensitivity or calibrate your recording system for making sound intensity level measurements in your...
+ −

$3.50
Coaxial Cable (Sold by the Meter) #26AWG, coaxial cable with >95% coverage braided shield. All tinned copper conductors. Dimensions are the same as...
+ −

$4.75
Balanced Cable (Sold by the Meter) #24AWG, balanced cable with belting layer and >95% coverage braided shield. All tinned copper conductors. Highly...
+ −

$4.75
Balanced Reinforced Cable (Sold by the Meter) #26AWG, Kevlar reinforced, balanced cable with belting layer and spiral shield. All tinned copper...
+ −

$149.99

Small and economical 32-bit float recorder, compatible with the Aquarian Audio H2dX and other hydrophones.


$49.99
Zoom Bluetooth adapter The BTA-1 can be used with a variety of Zoom Products for functions such as wireless control, time code and more....
+ −

$199.99
The First Dedicated 32-bit Float Audio Interface The ZOOM UAC-232 USB Audio Converter is the first dedicated 32-bit float audio interface ,designed...
+ −

$219.99
32-Bit Float Recording for All The Zoom H4essential offers an entry-level professional recorder with true 4-channel input capability. With four...

$109.99

Small and economical 32-bit float recorder, compatible with the Aquarian Audio H2dM and other hydrophones.


$3.00
Nitril O-ring and Nylon M10-1.5 nut for bulkhead mounting of all Aquarian M10 thread mounts. Technical details about using this kit
+ −

$37.50
Converts plug-in-powered hydrophones to balanced XLR output. Phantom power is required. Phantom compliance voltage required: 18-48V Plug-in power...
+ −

$27.00
Weight assembly for use with A5 hydrophone. M10 female thread on one end. Mass: 114g Specific Gravity: 5.7 Installation Guide
+ −

$199.99
4-input; 4 output (four microphone preamps) 24-bit/96KHz USB audio interface with direct monitoring and internal AA battery power option. The new AMS...
+ −

$149.99
2-input; 4 output (two microphone preamps) 24-bit/96KHz USB audio interface with direct monitoring and internal AA battery power option. The new AMS...
+ −

$99.99
2-input; 2 output (one microphone preamp) 24-bit/96KHz USB audio interface with direct monitoring The new AMS series low-cost audio interfaces from Zoom...
+ −

$299.99
The Small and Mighty Field Recorder With 32-bit float recording, the F3 effortlessly captures the quietest raindrops and the loudest explosions. Its...

$75.00
The PA6 is designed to connect passive piezo sensors, used in most hydrophones, to professional-grade microphone preamplifiers. These include preamps that...
+ −

$80.00
The IEPE1 is designed to connect passive piezo sensors, used in most hydrophones, to constant-current bias supplies, typically used in data acquisition...
+ −

$70.00
Low-noise broadband hydrophone amplifier for use with passive hydrophones. Provides the necessary signal conditioning for connecting hydrophone to recorder,...

$5.00
Terminal Block added to XLR contacts allows the user to easily disassemble the connector from the hydrophone cable in the field for routing cable though...
+ −

$25.00

Hand reel for winding long hydrophone cables. Fits up to 100 meters.

+ −

$40.00

Low-cost Hydrophone FET buffer amp, low-noise, low-power, 3dB gain. Use with H1 hydrophones. Also works great for buffering piezo contact microphones, electric guitars and other high-impedance audio signals.


$5.00
Cable termination: install connector on one end of custom cable
+ −

$6.00
Neutrik 3-pin male in-line XLR, black shell, gold contacts
+ −

$5.75
Neutrik 3-pin female in-line XLR, black shell, silver contacts
+ −

$4.00

Neutrik (Rean) 1/4" TS plug, gold contacts

+ −

$4.25
2 pole 1/4" cable jack, full metal, max. cable O.D. 6 mm
+ −

$3.50
Neutrik (Rean) 3.5mm TRS, gold contacts
+ −

$3.00
Neutrik (Rean) 3.5mm TRS in-line jack, gold contacts
+ −

$38.99

Amplified speaker for use with H1a hydrophones

+ −

$15.99

Patch cable: 3.5mm stereo plug to 1/4" mono plug. 3-foot length.

+ −

$6.00

Patch cable: 3.5mm stereo plug to 3.5mm stereo plug, Length: 6 feet

+ −

$19.00

Place over the end of your H1a, H2a, or H2a-XLR hydrophone for use as a contact microphone

+ −

$120.00 $169.00
New A5 hydrophone with 0.5 meter cable length. Prior generation cable, fully compatible with all A5 optional accessories including weight and PIP-XLR...
+ −

$68.00 $80.00
New IEPE1 BNC-to-BNC Pre-amplifiers 24dB of gain, instead of nominal 26dB of gain. 5x quantity available, priced per pre-amplifier. See more...
+ −

$14.99 $29.99
New in-box Zoom SPH-1n for the Zoom H1n Handy Recorder
+ −